Mitsui Link Lab Shinkiba 2

Access

Address: 1-17-8, Shinkiba, Koutou-ku, Tokyo
googlemap

Access: [Tokyo Metro Yurakucho Line, Rinkai Line, JR Keiyo Line]
7-minute walk from Shinkiba Station

Route map

Appearance photo

Building Overview

Total rental area: 14,588m2 (approximately 4,413 tsubo)
Date of opening: April, 2023
Floor height: 4,500mm
Tentaka: CH=3,000mm
Floor load: 1,000kg/m2 (1st floor)
500kg/m2 (2nd to 4th floors)
Draft chamber Acceptance of installation: Allowed
Water supply and drainage facilities: Yes,
City Gas: Yes (in-service work required)
Electric capacity: Single-face 100/200V: 200VA/㎡
Phase III 200V: 100VA/㎡
Emergency power generation: Available: Single phase (consultation required for three phases)
Parking lot: Number of parking spaces 35 (including disabled persons)

※The information provided is subject to change in future.

Floor plan

A total of 112 blocks that can be flexible from a minimum of about 73 m2 to a maximum of about 4,000 m2.

1st floor plan

Standard floor plan

Exclusive Department

Wet lab specifications compatible with all sections BSL2.
In addition, there is a section that makes it easier for startups to move in.

An area of 73 to 99 m2 is available. In advance of outlet work, partition work, local exhaust duct work, sink installation work are performed in advance. Furniture and fixtures, experimental equipment, etc. will be provided by the tenant.

About common areas

In addition to cafes, lounges, conference rooms, etc., rooftop terraces, hydrophilic spaces, etc.
A full-fledged shared facility that takes advantage of the liberation of the oceanfront.

Shared meeting room and refreshment space

Use of common equipment

Equipment with many needs will be installed in the common equipment room to reduce initial investment by tenants.

1 Image analyzer / 1 cell analyzer / 4 fluorescent microscope reader / 1 microplate reader / 1 real time PCR / 2 microscopes / 2 microscope spectrometer / 1 digital PCR